What You Need To Know About Building a Wildfire-Resistant Custom Home

When you finally build your dream home, the last thing you want is to lose it to a wildfire. That risk is worth talking through with your builder, especially if your lot backs up to trees or brush. One advantage of building custom homes is that you can plan for fire protection from day one, while you still have room to change the design of your wildfire-resistant custom home.

Everything Starts With the Lot  

A wildfire-resistant custom home gives embers fewer places to settle and reduces the chances that flames or heat from a nearby fire will ignite the house. Start by considering where the house will sit and what could burn near it.

Those elements can influence how a fire progresses and what you can do to stop it. For example, while you might want to position the house so a wall of windows overlooks a stand of trees, you need to consider that fire heat can break windows even before flames reach them. It may be better to adjust the design to create more space and reduce that risk. 

Your builder needs to follow local wildfire building codes and standards when deciding where to place the house and how to design it. Requirements vary by jurisdiction, especially where homes border or mix with wildland vegetation. Knowing the rules from the start gives your builder time to account for them in the plans and estimate.

Understand Fire-Safe Roof Design 

Wildfire danger extends beyond approaching flames. Windborne embers can travel miles ahead of a fire and ignite materials around your home. These tiny bits of burning debris can land on roofs, dry vegetation, or even in cracks around windows and doors, igniting a new fire.  

Therefore, wildfire-resistant home design starts on paper with the roof, which is especially vulnerable because embers can land on it and ignite trapped debris. Although you might like the look of a roof with dormers and varying heights, a simple roofline is often safer. Every valley where two roof slopes meet creates a nook that can collect debris that will become kindling for embers.  

Ember-resistant roofing and siding are just as important as the overall design. A Class A roof assembly, using metal, asphalt shingles, or clay or concrete tiles, is the best option for fire resistance when flames come from outside. Include enclosed eaves to cover the underside of the roof overhang, where exposed framing can trap embers and heat. Your builder can also specify ember-resistant vents to ensure the attic is properly ventilated while reducing the chance that embers get in. 

It’s also worth thinking about how you’ll keep the roof clear after you move in. A gutter tucked above the porch may look fine on the plans, but how will you reach it when it fills with leaves? Ask your builder to point out places where debris is likely to collect and talk through how you’ll keep those spots clear. That’s an easier conversation to have while the roofline is still on paper than when you’re cleaning out pine needles every other week.

Wildfire Resistance Means Protecting the Walls, Too  

Although the roof is a big part of a wildfire-resistant custom home, the walls, both inside and out, also need attention. Vinyl siding can melt in high heat, and wood siding can catch fire. Fire-resistant building materials like fiber cement, stucco, brick, stone, and metal panels are better options.   

Because embers can collect around the house’s foundation or settle into gaps in the edges of each wall, the home design and construction need to account for those areas. Ask your builder about using noncombustible materials at the base of the wall, where embers can collect.

It’s not just the exterior walls that need to be fire-resistant, either. The material used inside for structure and insulation can also make a difference. Insulated concrete forms (ICF)
can resist fire three to four times longer than wood-framed walls. Another good choice is mineral wool insulation, which is noncombustible.

Include Fire-Resistant Windows and Doors

When a fire’s raging, glass is a weak link. Heat can crack it, and once it breaks, embers have a clear path inside. 

This doesn’t mean you need to sacrifice the large windows you envisioned. You just need to choose more durable glass, such as dual-pane windows with tempered glass. Tempered glass holds up better under heat, and a second pane can help keep the opening closed if the first breaks. A noncombustible window frame, like aluminum, is better than wood.

Don’t forget doors, either. Weatherstripping helps close gaps around exterior doors where embers could slip in.

Incorporate Defensible Space Landscaping Into Your Plans

Defensible space landscaping is part of wildfire-resistant custom homes, and it starts with the initial design. 

Defensible space is essentially your home’s bubble. It’s a buffer zone around the house, including structures like the deck and garage, where you clear debris and manage vegetation. Typically, it falls into three zones: 

  • Keep nothing combustible within the first five feet of the home. 
  • Between five and 30 feet from the home, limit vegetation and clear away debris.
  • Maintain vegetation to reduce the fuel that can feed flames or create radiant heat from 30 to 100 feet from the home. 

Although you can address landscape details, such as plant selection, later during the design phase or after building your home, some details need early attention. For example, a wooden fence can carry flames to the siding, so use a noncombustible section where the fence meets the house. Use gravel or concrete under an attached deck, and leave room to clear leaves that blow underneath.   

Make Sure the Bid Matches Your Plans

When you get an estimate for a wildfire-resistant custom home, look for the names of the fire-resistant building materials you discussed. A line that just says “roofing” doesn’t tell you what the builder plans to put under the shingles. Ask what’s included in the assembly and whether the bid covers the vents shown on the drawings. If a product is back-ordered and the builder suggests a substitute, ask whether the replacement still meets the requirements for that part of the house.

Check who’s responsible for the work outside the house, too. If you’re hiring a separate landscaper, make sure their estimate includes adding a gravel strip or paving within the first five feet of the foundation. Otherwise, that work can fall between the two bids.

Talk Through Your Plans With Schar Construction, Inc.

Whether you’ve already selected a home lot or you’re still sketching out ideas for your dream home, thinking about fire risks and incorporating resistance into the design can help prevent serious damage down the road. This is especially important if you’re building in an area prone to wildfires. 

Building your home in Oregon’s fire country takes a team that understands local conditions and construction needs. Schar Construction, Inc. can explain the principles of wildfire-resistant custom home design and construction and how to ensure your home meets local code requirements before you finalize the plan. To get started, call (541) 255-1624 to request a consultation and plan a home that fits how you want to live, complete with your must-have features.

Share:

Facebook
Twitter
Pinterest
LinkedIn

Leave a Comment

Table of Contents

more

Related Posts

cost to build a custom home
Custom Homes

What You Need To Know About Building a Wildfire-Resistant Custom Home

When you finally build your dream home, the last thing you want is to lose it to a wildfire. That risk is worth talking through with your builder, especially if your lot backs up to trees or brush. One advantage of building custom homes is that you can plan for fire protection from day one, while

Read More »
A large, modern custom home featuring stone siding, multiple garage doors, and a manicured lawn under a clear blue sky.
Custom Homes

Do You Need a Permit To Build a Custom Home?

If you’re considering building a custom home, you’re likely weighing all of the complications that may lie ahead. You get to design your dream home in your ideal location, but it also means months of coordination and waiting. One of the biggest questions prospective clients ask before diving into the process is about the permit

Read More »
A multi-story modern custom home built on a steep, lush hillside surrounded by trees, illustrating hillside sloped construction.
Custom Homes

Your Guide to Building a Custom Home on a Slope 

You’ve found your dream location for your forever home. It is in your desired part of town, has the amount of land you want, and offers your preferred distance from neighbors. The catch? The lot is sloped.  Even a gentle slope can initially feel like a dealbreaker for an otherwise perfect lot, but it doesn’t

Read More »